![](/images/new-backgrounds/1109640/10964079x1.webp)
Chapter
Modifying the Factory Default Management Network Settings on the USB Key
The USB key contains a text file, lan.cfg, which holds the factory default IP address parameters. These parameters must be modified to your local network settings using the LAN Configuration Utility, also on the USB key.
To modify the USB key settings:
1Take the USB Key from the Installation Accessories kit and insert it into the PC workstation and
The LAN Configuration Utility dialog box opens.
2Modify the following parameters in the utility’s dialog box using the information supplied by your network administrator.
—Control Unit IP Address
—Shelf Management IP Address
—Subnet Mask
—Default Router IP Address
3Click OK.
4Remove the USB Key from the PC.
The USB key is required for first entry