|
| Polycom RMX 1500/2000/4000 Getting Started Guide |
|
|
|
| Table | |
|
|
|
| Field | Description |
|
|
|
| Network Service | The name Default IP Service is assigned to the IP |
| Name | Network Service by the Fast Configuration Wizard. |
|
| This name can be changed. |
|
| Note: This field is displayed in all IP Signaling dialog |
|
| boxes and can contain character sets that use |
|
| Unicode encoding. |
|
|
|
| Signaling Host | Enter the address to be used by IP endpoints when |
| IP Address | dialing in to the MCU. |
|
| Dial out calls from the RMX are initiated from this |
|
| address. |
|
| This address is used to register the RMX with a |
|
| Gatekeeper or a SIP Proxy server. |
|
|
|
| Media Card | Enter the IP address(es) of the media card (s) |
| IP Addresses | (MPM/MPM+/MPMx 1 and MPM/MPM+/MPMx |
|
| (if installed)) as provided by the network |
|
| administrator. Endpoints connect to conferences |
|
| and transmit call media (video, voice and content) |
|
| via these addresses. |
|
|
|
| Subnet Mask | Enter the subnet mask of the MCU. |
|
| Default value: 255.255.255.0. |
|
|
|
If Secured Communication is required on the RMX: complete the Fast
Configuration Wizard, Login, install the Certificate and then enable Secured
Communication Mode.
2Click Next.