Chapter
4Using the two wires of an 10 AWG cable running from the DC power distribution unit, connect the black wire into the
•A 10 AWG cable must be used to connect the mains with the RMX 4000 DC Power Rail Model.
•The supply wires for DC version must be terminated using quick connectors.
•Extension cords may not be used.
ESD connector
Ground connector
Circuit breaker - ON position
RTN
| Blank panel Circuit |
| breaker - OFF | ||
|
| ||||
|
| ||||
|
| position | |||
|
|
|
|
The center PRM slot/module is fitted with a blank panel and the slot cannot be used on a system with DC Voltage.
5Connect the green or
The rating of the protective earthing conductor should be a minimum of 10AWG.
If the unit is rack mounted, the