Chapter 5: Management with WebPAM PRO
111
There are four major parts to the WebPAM PRO interfac e:
• Header (see page111)
• Tree View (see page111)
• Management View (see page112)
• Event Frame (see page 113)
Using the Header
The Header contains the following items:
• Language – To choose a display language, see “Choosing a Display
Language” on page113.
•Show/Hide Event Frame – To view the Event Frame, see “Viewing the
Event Frame” on page113.
•Show/Hide Storage Network – To view the Storage Network, see “Viewing
the Storage Network” on page114.
•Contact Us – Click here for Promise Technology contact information. Or see
“Contacting Technical Support” on page 273.
•Logout – To logout, see “Logging out of WebPAM PRO” on page115.
Using Tree View
Tree View enables you to navigate around all components of the Host PC (where
the SuperTrak controller card is installed), software management, RAID
controller, enclosure, physical drives, disk arrays, logical drives, and spare
drives. The figure below shows the components of Tree View.