Promise Technology EX8658, EX8654, EX8650, EX4650 manual Port number

SuperTrak EX Series User Manual

-p <port number>	Subsystems only. Specifies the port number of the TFTP
	server.
	If no port number is given, the default value of 69 is used.

Examples

ptiflash -f fw_multi_20051022.img[for SuperTrak controllers]

ptiflash -t -s 192.168.1.1 -f fw_multi_20031010.img -p 69[for embedded Subsystems]

ptiflash -f fw_multi_20031010.img[for in-band Subsystems]

rc

Usage

rc [-a <action>] [-l <LdId>]

rc -a start -l <LdId> [-n] [-p]

rc -a stop -l <LdId>

rc -a pause -l <LdId>

rc -a resume -l <LdId>

Summary

Th rc command starts, stops, pauses and resumes a Redundancy Check and monitors the progress of a running Redundancy Check.

Options

-a <action>	Specifies action to perform.
list	(Default) Displays active and paused Redundancy
	Checks and their status.
start	Starts a Redundancy Check.
stop	Stops a Redundancy Check.
pause	Pauses a Redundancy Check.
resume	Resumes a paused Redundancy Check.
-l <Ld ID>	Specifies the logical drive ID on which to run the
	Redundancy Check.
-n	Do not fix inconsistent data. This option causes
	Redundancy Check to run without correcting inconsistent
	data. All inconsistency errors are reported.
-p	Pause on error. This option causes Redundancy Check
	to pause when it encounters inconsistent data. The
	default is to continue on error.

210