SuperTrak EX Series User Manual
120
Working with Subsystem/Host ManagementSubsystem/Host Management includes the following functions:
• Viewing Subsystem/Host Information (page120)
• Adding a Subsystem or Host (page120)
• Deleting a Subsystem or Host (page121)
• Setting User Privilege (page122)
Viewing Subsystem/Host Information
To view the Subsystem/Host List:
1. Click the Administrative Tools icon in Tree View.
2. Click the Subsystem/Host Management icon.
In the Information tab, the following information appears:
• Subsystem/Host IP address
• Management Port IP address
• Health – A green checkmark means OK. A red X indicates a problem
• Model of the RAID controller
• Alias of the RAID controller
• Firmware Version of the RAID controller
• Interface of the RAID controller
• World Wide Number of the RAID controller
If a red X appears under Health, click the Health Information icon to
display a breakdown showing the health of the controller, disk arrays, logical
drives, spare drives, and physical drives.
Adding a Subsystem or Host
To add a subsystem/ or host PC to WebPAM PRO:
1. Log into WebPAM PRO as the Administrator or a Super User.
2. Click the Administrative Tools icon in Tree View.
3. Click the Subsystem/Host Management icon.
4. Click the Add Subsystem/Host tab in Management View.