Promise Technology EX8650 Installing the CLI onto VMware, Sh CLIInstaller...VMware.bin -i silent

SuperTrak EX Series User Manual

Installing the CLI onto VMware

The VMware virtualization platfrom does not support WebPAM PRO, therefore they cannot use the WebPAM PRO installer. Those systems use a binary file to install the CLI in a terminal window.

Before you begin, download the CLI_Installer...VMware.bin file from the Promise Support Website to your PC or server.

To install the CLI onto your VMware platform:

1.Boot the PC or server, log in as root.

If the computer is already running, exit all programs. If you are not logged in as root, log out, then log in again as root.

2.Copy the CLI_Installer...VMware.bin file to the /root directory on your PC.

3.Open a terminal window and type

sh CLI_Installer...VMware.bin -i silent

and press Enter.

CLI_Installer...VMware.bin represents the exact name of the CLI binary file, such as CLI_Installer_3_11_0000_00_VMware.bin

After the installation is finished, go to the /opt/Promise/WebPAMPRO/Agent/bin directory and type ./cliib to start the CLI.

Go to “Chapter 6: Management with the CLI” on page 149 for information about using this application.

36