Promise Technology EX8658, EX8654 manual Changing CIM Client Settings, Changing CIM Server Settings

SuperTrak EX Series User Manual

Changing CIM Client Settings

The CIM client is part of the WebPAM PRO Utility Server. The Utility Server can be installed on any PC on the network. Only one CIM client and Utility Server installation is required.

The CIM client works with CIM server. The CIM server is part of the WebPAMPRO Agent. The Agent must be installed on every host PC where the HBA RAID controller is installed to enable management over a network.

Under most conditions, there is no need to change CIM settings.

To change settings for the CIM client:

1.Click the Administrative Tools icon in Tree View.

2.Click the Software Management icon.

3.Click the CIM Settings tab.

4.Type the user name in the CIM User name field. The default name is “cim”.

5.Type a password into the CIM User Password field. The default password is “password”.

6.Click the Submit button.

Important

If you change CIM client settings, you must make matching CIM server settings on ALL Host PCs, otherwise WebPAM PRO will be unable to monitor them.

Be sure you change the CIM server settings on ALL of your Host PCs to match the CIM client settings.

Changing CIM Server Settings

To change settings for the CIM server:

1.On the Host PC, access the WebPAM PRO agent folder.

•Windows – C:/Program Files/Promise/WebPAMPRO/Agent/bin

•Linux – /opt/Promise/WebPAMPRO/Agent/bin

2.Open a command-line utility, type cimuser --helpand press Enter.

3.Follow the instructions on the screen.

126