81
Chapter 4: SuperBuild™ Utility
• SuperTrak BIOS (below)
• Accessing the Main Menu (page84)
• Selecting a Controller (page 85 )
• Viewing Controller Information (page86)
• Managing Physical Drives (page87)
• Managing Disk Arrays (page89)
• Managing Logical Drives (page92)
• Managing Spare Drives (page97)
• Viewing Background Activity (page100)
• Managing the Event Log (page101)
• Working with Time Sync (page103)
• Using the Miscellaneous Menu (page104)

SuperTrak BIOS

This section explains the inform ation that you can obtain from the SuperTrak
BIOS.
When the SuperTrak BIOS loads during bootup, the BIOS displays pertinent
information about the RAID logical drives. At this point, press Ctrl-S to enter the
SuperBuild Configuration Utility.
The SuperTrak BIOS screen displays the following information:
•Summary of Controller – The SuperTrak controller model number.
•Version of Single Image – The version number of the image used to update
the firmware on the SuperTrak controller.
•Number of Physical Drives – The number of physical drives attached to
this controller.
•Number of Disk Arrays – The number of disk arrays managed by this
controller.
•Number of Logical Drives – The number of logical drives managed by this
controller.
See Figure 1.