179
Chapter 6: Management with the CLI
• Opening the CLI on Windows (below)
• Opening the CLI on Linux, FreeBSD, and VMware (page180)
• Table of Supported Commands (page 181)
• Notes and Conventions (page 183)
• List of Supported Commands (page184)
SuperTrak EX Controller’s Command Line Interface (CLI) provides rapid setup of
disk arrays and logical drives. You can also manage your SuperTrak system
using the CLI. However, ongoing management is much easier with the
SuperBuild utility or WebPAM PRO.

Opening the CLI on Windows

To open the CLI, click the CLI icon on the desktop (right), or:
1. Go to Start > Run and click the Browse button.
2. Navigate to the C:\Program Files\WebPAMPRO\Agent\bin folder.
3. Click cliib.exe file then click the Open button.
4. Click the OK button in the Run dialog bo x.
The CLI window opens.