
User Tools (System Settings)
5
86
Interface Settings/Parallel Interface
❖Parallel Timing
Specifies the timing setting for the parallel interface. Under normal circum- stances, you will not need to change this setting.
Note
❒Default setting: ACK outside
❖Parallel Communication Speed
Specifies the communication speed of the parallel interface. If the communi- cation speed is set too fast, data transfer may not flow smoothly. If this occurs, change the setting to “Standard”.
Note
❒Default setting: High speed
❖Selection Signal Status
Specifies the signal setting of the parallel interface.
Note
❒Default setting: High
❖Input Prime
Specifies whether the prime signal is active or inactive when an input prime signal is sent. Under normal circumstances, you will not need to change this setting.
Note
❒Default setting: Invalid
❖Bidirectional Communication
Specifies the printer's response mode and so forth for a status request when using the parallel interface. If you experience problems when using other manufacturers, printers, set this to “OFF”.
Limitation
❒If this is set to “OFF”, bidirectional communication functions will not work.
Note
❒Default setting: ON
❖Signal Control
Specifies the error processing settings for when an error occurs when printing from a computer. Under normal circumstances, you will not need to change this setting.
Note
❒Default setting: Job acceptance priority