Where to Put Your Machine
153
7
•When the main power switch is in the Stand-by position, the optional anti-
condensation heaters are on. In case of emergency, unplug the machine's
power cord.
•When you unplug the power cord, the anti-condensation heaters turn off.
•Make sure that the plug is firmly inserted in the outlet.
•Voltage must not fluctuate more than 10%.
•The socket-outlet should be installed near the equipment and should be easily
accessible.
Access to the Machine
Place the machine near the power source, providing clearance as shown.
1. Rear: more than 5 cm (2")
2. Right: more than 4 cm (1.6")
3. Front: more than 70 cm (27.5")
4. Left: more than 5 cm (2")
Note
❒For required space when options are installed, contact your service represent-
ative.
MartiniC1_GBzen2_FM.book Page 15 3 Friday, April 19, 2002 2:1 8 PM