Ricoh 1060, 1075 manual Function Reset Timer, Interleave Print, Output Tray Setting

User Tools (System Settings)

Note

❒Default setting: Display mode

❒When the optional Booklet Finisher, Finisher 3000M (50-Sheet Staples), or Finisher 3000B (100-Sheet Staples) is installed, you can specify an output tray to which documents are delivered. For more information about how to specify an output tray for each function, see the following descriptions:

•p.77 “Output: Copier”

•p.77 “Output: Document Server”

•p.78 “Output: Printer”

❖Function Reset Timer

You can set the length of time the machine waits before changing modes when using the multi-access function (⇒ p.51 “Multi-Access”). This is useful if you make many copies and you have to change the settings for each copy. If you set a large value, you can prevent jobs from other functions interrupt- ing the copy job.

5

Note

❒Default setting: 3 seconds

❒The Function Reset Timer setting is ignored if “Interleave” is set for “Print Priority” (⇒ p.75).

❒When you select “Set Time”, enter the time (3–30 seconds in one second in- crements) using the number keys.

❖Interleave Print

You can set the timing for functions to switch when [Print Priority] has been set to [Interleave].

Note

❒Default setting: 10 sheet(s)

❒Depending on printing time, set values may change.

❒The timing for functions can be set from 1 to 20 sheets.

❖Output Tray Setting

You can set the way or timing for switching the output tray.

• Output Tray

You can set the way for switching the output tray from “According to Function Setting” or “Auto Change”.

Note

❒Default setting: According to Function Setting

❒“Auto Change” can be used when “Print Priority” is set to “Job Or- der”.⇒ p.75 “Print Priority”

76