Troubleshooting

d Adding Staples

Note

When removing jammed staples, staples might not be ejected the first few times you try to use the stapler.

Important

If you use a staple cartridge other than that recommended, staple failure or staple jams might occur.

A paper jam will occur if the machine staples using the Booklet Finisher with- out the saddle stitch stapler cartridge. Make sure the cartridge is set.

Reference

For details about the type of finisher, see p.23 “External Options”.

Finisher 3000M (50-Sheet Staples), Booklet Finisher

6

• Open the finisher front cover.

• Pull out the staple unit.

• Pull out the cartridge gently.

• Pull up the upper unit of the cartridge while holding both sides of the cartridge.

134

Page 148
Image 148
Ricoh 1060, 1075 manual Adding Staples, Finisher 3000M 50-Sheet Staples, Booklet Finisher, 134