Ricoh 1060, 1075 manual Interface Settings/Network

User Tools (System Settings)

❖ Set Time

Set the time for the copier's internal clock using the number keys.

Note

❒ To change between hours, minutes and seconds, press the [←] and [→] keys.

❖ Weekly Timer Code

Sets an 8-digit code to turn on the main power during a time frame in “Week- ly Timer”.

Note

	❒ Default setting: OFF
	❒ If “ON” is selected, enter the timer code.
	❒ If “ON” is selected without entering the timer code, the machine cannot be
	used, even if the power is turned on. If “Off” is selected, the machine can
	be used without entering a timer code, when it is turned on.
	❖ Weekly Timer: (Monday-Sunday)
5
	Set the power on timer using the number keys.

Interface Settings/Network

❖IP Address

Before using this machine with the network environment, you must config- ure the IP address.

Note

❒Default setting: 011.022.033.044

❒Do not use an IP address that is used for another machine. To get the ad- dresses, contact your network administrator.

❒If you install the IEEE 1394 Interface Board (option) and use the IEEE 1394 interface, you must set the address of the domain, different from the IP ad- dress of [IEEE 1394]. If you intend to set the address for the same domain, set a different value for the Sub-net Mask.

❒Press the [←] or [→] key to move in 3-digit increments.

❒Press the [Clear] key when the wrong address is entered.

❖Sub-net Mask

This is a number used to mathematically “mask” or hide an IP address on the network by eliminating those parts of the address that are alike for all ma- chines on the network.

Note

❒Default setting: 000.000.000.000

❒Press the [←] or [→] key to move in 3-digit increments.

❒Press the [Clear] key when the wrong address is entered.

84