Configuring the Network
392
AMake sure that the [Network] key is selected, and then press the [NW Frame
Type] key.
BSelect the Frame Type, and then press the [OK] key.
When using the IEEE 1394 Interface (option)Note
❒When you use the IEEE 1394 Interface, you cannot use the DHCP. You
must set the fixed IP address.
❒Be sure to set the IP over 1394 to “Effective”. The default is set to “Effec-
tive”.
Reference
When you use parallel printing, see the Printer Reference.
AMake sure that the [Network] key is selected, and then press the [IEEE 1394]
key.
BPress the [IP Address] key.
CUse the number keys to enter the IP address, and then press the [OK] key.
DPress the [Sub-net Mask] key.
EUse the number keys to enter the Subnet Mask, and then press the [OK]
key.
FPress the [IP over 1394] key.
GMake sure that [Active] is selected, and then press the [OK] key.
Note
❒If [Active] is not selected, press the [Active] key, and then press the [OK]
key.
MartiniC1_GBzen2_FM.book Page 39 Friday, April 19, 2002 2:18 PM