Basics

Turning On the Power

This machine has two power switch- es.

Operation switch (right side of the

control panel)

2 Press this switch to activate the machine. When the machine has warmed up, you can make copies.

Main power switch (left side of the ma- chine)

When the machine is not to be used for an extended period of time, turn off the main power switch.

Note

This machine automatically enters Low Power mode or turns itself off

if you do not use it for a certain pe- riod. ⇒ p.82 “Auto Off Timer” , p.82 “Energy Saver Timer”

Turning On the Main Power

A Make sure that the power cord is firmly plugged into the wall out- let.

B Open the switch cover and turn on the main power switch (make sure that the Main Power indica- tor lights up).

Important

Do not turn off the main power immediately after it has been turned on. Failure to observe this may result in damage to the hard disk or memory, leading to malfunction.

Turning On the Power

A Press the operation switch to make the On indicator light up.

Note

If the power is not turned on when the operation switch is pressed, check if the main pow- er switch is on. If off, turn it on.

32

Page 46
Image 46
Ricoh 1060, 1075 manual Turning On the Power, Turning On the Main Power, Operation switch right side Control panel