Ricoh 1060, 1075 manual Press the Infrastructure key, and then press the OK key

Basics

When using the Wireless LAN Interface (option) in Infrastructure Mode

Note

❒The network administrator must check the environment and set the Com- munication mode, WEP key, and SSID correctly. For details on settings, see “Using the IEEE 802.11b (Wireless LAN)” in the Network Printing Guide.

2	❒ Enter the WEP key in hexadecimal. You can enter 10-digits for 64-bit data
	or 26-digits for 128-bit data.

❒Characters used for setting SSID are <ASCII 0⋅20 to 0⋅7e> which are case- sensitive. You can enter up to 32 characters.

❒You can also set the Infrastructure mode from the Web browser. For details on settings, see the Network Printing Guide.

AMake sure the [Network] key is selected, and then press the [LAN Type] key.

BPress the [IEEE 802.11b] key, and then press the [OK] key.

CPress the [IEEE 802.11b] key.

D Press the [Communication Mode] key.

E Press the [Infrastructure] key, and then press the [OK] key.

F Press the [SSID Setting] key.

GPress the [Enter SSID] key.

HEnter the SSID, and then press the [OK] key.

IPress the [OK] key.

JPress the [WEP (Encryption) Setting] key if setting is required.

KPress [Enter WEP key] and enter the WEP key, and then press the [OK] key.

LPress the [Active] key.

MPress the [OK] key.

42