Remarks
Maintaining Your Machine
If the exposure glass or ADF belt is dirty, copy clarity may be reduced. Clean these parts if they are dirty.
Important
❒Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get inside the machine or melt plastic parts, a failure might occur.
❒Do not clean parts other than those explicitly specified in this manual. Other parts should only be cleaned by your service representative.
❖How to maintain
Cleaning the machine Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth to remove the water.
Cleaning the Exposure Glass
The following procedure explains how to clean the exposure glass.
7
ANQ080S
Wipe the surface of the exposure glass.
Cleaning the Auto Document Feeder
The following procedure explains how to clean the ADF.
ANQ081S
Wipe the surface of the belt, moving it.
114