6. Clearing Misfeeds
This chapter explains what to do when paper or originals misfeed (become jammed inside the machine).
Removing Jammed Paper
RCAUTION:
•The inside of the machine could be very hot. Do not touch any parts other than specified in this document when removing misfed paper. Otherwise, it may cause burn injury.
RCAUTION:
•The fusing section of this machine might be very hot. Caution should be tak- en when removing misfed paper.
RCAUTION:
•Keep your hands clear of the booklet finisher tray when pulling out or push- ing in the finisher's staple unit. You can trap your fingers if you do not.
Important
❒When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings will be lost.
❒To prevent misfeeds, do not leave any torn scraps of paper inside the ma- chine.
❒Remove the fusing unit only when necessary.
❒Contact your service representative if misfeeds occur frequently.
Note
❒For details about how to locate and remove misfeeds, see “Checking Jammed Paper” or “Removing Jammed Paper”.
Reference
93