|
| When You Cannot Make Copies As Wanted |
| |
|
|
|
|
|
Problem | Cause | Solution |
|
|
|
|
|
|
|
In Margin Adjustment | There is a lack of margin | Set a narrower margin with User Tools. |
|
|
mode, parts of the origi- | space on the opposite | You can set the width between 0 - 30 |
|
|
nal image are not copied. | side of the binding posi- | mm (0” - 1.2”). |
|
|
| tion. | See “Front Margin: Left/Right”, “Back |
|
|
|
|
|
| |
|
| Margin: Left/Right”, “Front Margin: |
|
|
|
| Top/Bottom” and “Back Margin: |
|
|
|
| Top/Bottom”, General Settings Guide. |
|
|
|
| 2 | ||
|
|
|
| |
In Image Repeat mode, | You selected copy paper | Select copy paper larger than the origi- |
| |
|
| |||
the original image is not | the same size as the origi- | nals or select the proper reproduction |
|
|
copied repeatedly. | nals, or you did not select | ratio. |
|
|
| the proper reproduction |
|
|
|
| ratio. |
|
|
|
|
|
|
|
|
❖Stamp
Problem | Cause | Solution |
|
|
|
The stamp position is | The paper orientation is | Check the paper orientation and stamp |
wrong. | wrong. | position. |
|
|
|
The stamp is not printed | The back side stamp posi- | Reset the back side stamp position. See |
on the back side of sheets | tion is incorrect for the | “Back Side Stamp Position in Duplex”, |
when duplex copying. | paper size. | General Settings Guide. |
|
|
|
❖ Combine
Problem | Cause | Solution |
|
|
|
You cannot make a book | You selected a setting | Change the setting. See “Orientation: |
from Booklet or Maga- | (“Open to left”or “Open | Booklet, Magazine”, General Settings |
zine mode by folding | to right”) that does not | Guide. |
copies. | match the orientation of |
|
| originals. |
|
|
|
|
When using Combine, | You specified a reproduc- | When you specify a reproduction ratio |
parts of the image are not | tion ratio that does not | using Manual Paper Select mode, make |
copied. | match the sizes of your | sure that the ratio matches your origi- |
| originals and copy paper. | nals and the copy paper. Select the cor- |
|
| rect reproduction ratio before using |
|
| Combine mode. |
|
|
|
Copies are not in correct | You placed the originals | When placing a stack of originals in the |
order. | in the incorrect order. | ADF, the last page should be on the bot- |
|
| tom. |
|
| If you place an original on the exposure |
|
| glass, start with the first page to be cop- |
|
| ied. |
|
|
|
31