When the Machine Does Not Operate As wanted

When a Job is Not Performed

1

If you cannot execute a function, it may be that the machine is being held up by

another function.

 

If you cannot execute a function, terminate any other functions currently active, and then try executing the function again. In certain cases, you can carry out another job (copier, document server, printer, scanner) without canceling the current job being performed. Performing multiple functions simultaneously like this is called “Multi-accessing”.

Combination Chart

❖Function Compatibility

The chart shows Function Compatibility when print priority is set to “Inter- leave”. See “Print Priority”, General Settings Guide.

: Simultaneous operations are possible.

: Operation is enabled when the relevant function key is pressed and re- mote switching (of the scanner/external extension) is done.

: Operation is enabled when the {Interrupt} key is pressed to interrupt the

preceding operation.

→ : Operation is performed automatically once the preceding operation ends.

⋅ : The operation must be started once the preceding operation ends. (Simul- taneous operations are not possible.)

14