When You Have Problems Operating the Machine

Problem

Cause

Solution

 

 

 

 

 

 

 

You want to check print

You can print a single

Check print quality by printing out

 

 

quality before making a

copy without specifying

only the first set using the {Sample

 

 

large print run.

the setting again.

Copy} key.

 

 

 

 

 

 

1

“Original is being

Copier or Scanner func-

To cancel a job in progress, first press

 

scanned by another

tion is in use.

[Exit], and then press the {Copy} key or

 

 

function. Please

 

{Scanner} key. Next, press the {Stop}

 

 

wait.” appears.

 

key. When the message “The Stop

 

 

 

key was pressed. Stop copy-

 

 

 

 

 

 

 

 

ing?” press [Stop].

 

 

 

 

 

 

 

“Cannot display

The image data may have

Pressing [Exit] displays the preview

 

 

preview of this

been corrupted.

screen without a thumbnail.

 

 

page.” appears, and

 

 

 

 

you can not check the

 

 

 

 

thumb nail image.

 

 

 

 

 

 

 

 

 

Note

❒If you cannot make copies as you want because of paper type, paper size, or paper capacity problems, use recommended paper. See “Copy Paper”, About This Machine.

❒Using curled paper often causes misfeeds, soiled paper edges, or slipped po- sitions while performing staple or stack printing. When using curled paper, take the stiffness out of the paper with your hands to straighten out the curl, or load the paper up side down. Also, to prevent paper from curling, lay pa- per on a flat surface, and do not lean it against the wall.

13