Troubleshooting When Using the Printer Function
|
| Problem | Cause | Solution |
|
|
|
|
|
|
| Images are printed at | The tray's side fences | Check the side fences are locked. See p.75 |
|
| slant. | might not be locked. | |
|
|
|
|
|
|
| Print is slanted. | The paper is feeding | Load the paper correctly. See p.65 “Loading |
|
|
| in at a slant. | |
|
|
|
|
|
|
| Misfeeds occur fre- | The number of sheets | Load paper only as high as the upper limit mark- |
|
| quently. | loaded exceeds the ca- | ings on the side fences of the paper tray or bypass |
|
|
| pacity of the machine. | tray. See “Copy Paper”, About This Machine. |
|
|
|
|
|
|
| Misfeeds occur fre- | The paper is damp. | Use paper that has been stored in the recom- |
|
| quently. |
| mended temperature and humidity condition. |
3 |
|
|
| See “Copy Paper”, About This Machine. |
|
|
|
| |
|
|
|
|
|
|
| Misfeeds occur fre- | The paper is too thick | Use recommended paper. See “Copy Paper”, |
|
| quently. | or too thin. | About This Machine. |
|
|
|
|
|
|
| Misfeeds occur fre- | The copy paper is | Use recommended paper. Use paper that has |
|
| quently. | wrinkled or has been | been stored in the recommended temperature |
|
|
| folded/creased. | and humidity condition. See “Copy Paper”, |
|
|
|
| About This Machine. |
|
|
|
|
|
|
| Misfeeds occur fre- | Printed paper is being | Use recommended paper. See “Copy Paper”, |
|
| quently. | used. | About This Machine. |
|
|
|
|
|
|
| Copy paper becomes | The paper is damp. | Use paper that has been stored in the recom- |
|
| creased. |
| mended temperature and humidity condition. |
|
|
|
| See “Copy Paper”, About This Machine. |
|
|
|
|
|
|
| Copy paper becomes | The paper is too thin. | Use recommended paper. See “Copy Paper”, |
|
| creased. |
| About This Machine. |
|
|
|
|
|
|
| White lines appear. | When D is blinking, | Add toner. See p.87 “Adding Toner”. |
|
|
| toner is beginning to |
|
|
|
| run out. |
|
|
|
|
|
|
|
| When printing graph- | If the printer driver is | If you want to print accurately, set the printer |
|
| ics, the output and the | configured to use the | driver to print without using the graphics |
|
| screen are different. | graphics command, | command. See the printer driver Help. |
|
|
| the graphics com- |
|
|
|
| mand from the ma- |
|
|
|
| chine is used to print. |
|
|
|
|
|
|
|
| Garbled characters | The correct printer | Set the correct printer language. |
|
| are printed. | language might have |
|
|
|
| not been selected. |
|
|
|
|
|
|
|
| Images are printed in | The feed orientation | Set the machine's feed orientation and the |
|
| the wrong orienta- | you selected and the | printer driver's feed orientation accordingly. |
|
| tion. | feed orientation select- | See the printer driver Help. |
|
|
| ed in the printer driv- |
|
|
|
| er's option setup might |
|
|
|
| not be the same. |
|
|
|
|
|
|
|
| There is considerable | “Off mode / Sleep | The machine requires time to warm up if it has |
|
| delay between the | mode” might be set. | been in “Off mode/Sleep mode”. Specify “Off |
|
| print start instruction |
| mode/Sleep mode” in [System Settings], [Auto |
|
| and actual printing. |
| Off Timer]. |
|
|
|
|
|
46