Adding paper, Toner and Staples
Loading Paper into Tray 2 and 3
The following procedure explains how to load paper into Tray 2 and 3.
Important
❒Various sizes of paper can be loaded in Tray 2 and 3 by adjusting the positions of side fence and end fence.
❒Check the paper edges are aligned at the right side.
❒Do not stack paper over the limit mark.
A Carefully pull out the paper tray until it stops.
5
ANQ004S
B Square the paper and load it print side down.
ANQ005S
C Carefully slide the paper tray fully in.
Note
❒If you load a paper size that is not selected automatically, you will need to specify the paper size with the control panel. Following paper sizes that are not selected automatically.
❒The tray can hold up to 550 sheets.
Reference
p.75 “Changing the Paper Size”
p.84 “Changing to a Size that is Not Automatically Detected”
68