Loading paper
Loading Paper into the A3/11” ⋅ 17” Tray Unit
The following procedure explains how to load paper into the A3/11” ⋅ 17” tray unit. To use the A3/11” ⋅ 17” tray unit, you must replace Tray 1.
Important
❒Make sure that the paper stack is flush to the right side fence.
❒Do not stack paper over the limit mark.
A Carefully pull out the paper tray until it stops.
5
ANQ008S
B Place the paper in the tray along the edge on the left.
ANQ009S
C Carefully slide the paper tray fully in.
Note
❒The tray can hold up to 550 sheets.
67