Ricoh feeder manual 29

		When a Message Appears
Message	Cause	Solution
Cannot print from	The sub-machine's User	Press the {User Tools} key to close the
the sub-machine.	Tools menu is open.	User Tools menu.
Check the status of
the sub-machine.
Sub-machine is in	The sub-machine is in In-	Press the {Interrupt} key on the sub-ma-
Interrupt mode.	terrupt mode.	chine to cancel Interrupt mode.
			2
Sub-machine does	Paper type or tray set-	Make the same settings on both ma-
not have the same	tings on the two ma-	chines.
paper setting(s).	chines do not match.
The Cover Sheet	Cover settings on the two	Make the same settings on both ma-
setting(s) of the	machines do not match.	chines.
sub-machine is
different from
the main machine.
The Slip Sheet	Slip Sheet settings on the	Make the same settings on both ma-
setting(s) of the	two machines do not	chines.
sub-machine is	match.
different from
the main machine.
The Designation	Designation Sheet set-	Make the same settings on both ma-
Sheet setting(s)	tings on the two ma-	chines.
of sub-machine is	chines do not match.
different from
main machine.
Sub-machine paper	Paper tray settings on the	Make the same settings on both ma-
settings must be	two machines do not	chines.
the same to use	match.
this tray.
No stamp data in	Stamp data on the sub-	Reprogram the stamp on the sub-ma-
the sub-machine.	machine has been delet-	chine.
	ed.
Cannot print from	The sub-machine has	Continue copying using the main ma-
the sub-machine.	stopped due to power	chine.
Sub-machine will	failure or communication
be disconnected.	error.
Z-fold is avail-	Sort has not been selected	Select the Sort function.
able only when	with Z-fold.
Sort mode is se-
lected in Connect
Copy.

Reference

p.9 “When You Have Problems Operating the Machine”

23