When You Cannot Make Copies As Wanted

When Memory is Full

This section explains likely causes of and possible solutions for problems related to full memory.

Message

Cause

Solution

 

 

 

 

 

 

 

 

 

Memory is full.

The scanned originals ex-

Press [Print] to copy scanned originals

 

 

 

nn originals have

ceeds the number of pag-

and cancel the scanning data. Press

 

 

2

been scanned.

es that can be stored in

[Stop] to cancel the scanning data and

 

 

 

memory.

not copy.

 

 

 

Press [Print] to

 

 

 

 

 

 

 

 

copy scanned

 

 

 

 

 

originals. Do not

 

 

 

 

 

remove remaining

 

 

 

 

 

originals.

 

 

 

 

 

“n” in the message repre-

 

 

 

 

 

sents a changeable num-

 

 

 

 

 

ber.

 

 

 

 

 

 

 

 

 

 

 

Press [Continue]

The machine checked if

To continue copying, remove all copies,

 

 

 

to scan and copy

the remaining originals

and then press [Resume Printing]. To

 

 

 

remaining origi-

should be copied, after

stop copying, press [Stop].

 

 

 

nals.

the scanned originals was

 

 

 

 

printed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

❖ Connect Copy

 

 

 

 

 

 

 

 

 

Message

Cause

Solution

 

 

 

 

 

 

 

 

Sub-machine memo-

The quantity of data ex-

Continue printing on the main ma-

 

 

 

ry is full. Sub-

ceeds the capacity of the

chine.

 

 

machine will be

sub-machine.

 

 

 

 

disconnected.

 

 

 

 

 

 

 

 

 

 

 

Note

❒If you set [Memory Full Auto Scan Restart] in User Tools to [On], even if the mem- ory becomes full, the memory overflow message will not be displayed. The machine will make copies of the scanned originals first, then automatically proceed scanning and copying the remaining originals. In this case, the result- ing sorted pages will not be sequential. See “Input / Output”, General Set- tings Guide.

33