Maintaining Your Machine
Maintaining Your Machine
If the exposure glass, exposure glass cover, ADF or ARDF belt is dirty, copy clarity may be reduced. Clean these parts if they are dirty.
RCAUTION:
•Fire and breakdown can result from heavy accumulation of dust inside this machine. Consult your service representative for details about and charges for cleaning the machine's interior.
Important
❒Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get inside the machine or melt plastic parts, a failure might occur.
❒Do not clean parts other than those explicitly specified in this manual. Other parts should only be cleaned by your service representative.
❖Cleaning the machine
Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth to remove the water.
Cleaning the Exposure Glass
This section describes how to clean the exposure glass and scanning glass.
8
Clean 1 and 2.
97