When You Cannot Send or Receive Fax Messages As Wanted

Printing

Problem

Cause

Solution

 

 

 

 

 

 

 

Print is slanted.

The tray's side fences may not be

Check the side fences are locked.

 

 

 

locked.

See p.71 “Changing the Paper

 

 

 

 

Size”.

 

 

 

 

 

 

 

Print is slanted.

The paper is fed in at a slant.

Load the paper correctly. See p.65

 

 

 

 

“Loading Paper”.

 

 

 

 

 

 

 

Print is slanted.

The machine's cover is open.

Make sure the right and lower

 

 

 

 

right covers are properly closed.

 

 

 

 

 

 

 

Misfeeds occur frequently.

The number of sheets loaded ex-

Load paper only as high as the

 

 

3

 

ceeds the capacity of the machine.

upper limit markings on the side

 

 

 

fences of the paper tray or bypass

 

 

 

 

tray. See “Copy Paper”, About

 

 

 

 

This Machine.

 

 

 

 

 

 

 

Misfeeds occur frequently.

The paper is damp.

Use paper that has been stored in

 

 

 

 

the recommended temperature and

 

 

 

 

humidity condition. See “Copy Pa-

 

 

 

 

per”, About This Machine.

 

 

 

 

 

 

 

Misfeeds occur frequently.

The paper is too thick or too thin.

Use recommended paper. See “Copy

 

 

 

 

Paper”, About This Machine.

 

 

 

 

 

 

 

Misfeeds occur frequently.

The copy paper is wrinkled or has

Use recommended paper. Use pa-

 

 

 

been folded/creased.

per that has been stored in the

 

 

 

 

recommended temperature and

 

 

 

 

humidity condition. See “Copy

 

 

 

 

Paper”, About This Machine.

 

 

 

 

 

 

 

Copy paper becomes

Printed paper is used.

Use recommended paper. Do not

 

 

creased.

 

reuse copy paper that has been al-

 

 

 

 

ready printed onto. See “Copy

 

 

 

 

Paper”, About This Machine.

 

 

 

 

 

 

 

Copy paper becomes

The paper is damp.

Use paper that has been stored in

 

 

creased.

 

the recommended temperature and

 

 

 

 

humidity condition. See “Copy Pa-

 

 

 

 

per”, About This Machine.

 

 

 

 

 

 

 

Copy paper becomes

The paper is too thin.

Use recommended paper. See “Copy

 

 

creased.

 

Paper”, About This Machine.

 

 

 

 

 

 

 

Printed images contain

The machine is not on a level surface.

The machine must be placed on a

 

 

blots or are patchy.

 

stable and level surface.

 

 

 

 

Check the environment of loca-

 

 

 

 

tion to select an appropriate loca-

 

 

 

 

tion. See p.93 “Where to Put Your

 

 

 

 

Machine”.

 

 

 

 

 

 

 

Printed images contain

The paper is creased, curled, or

Straighten the paper if curled. Re-

 

 

blots or are patchy.

has blemishes.

place it if wrinkled or damaged.

 

 

 

 

See “Copy Paper”, About This

 

 

 

 

Machine.

 

 

 

 

 

 

 

31