Ricoh manual 29

		When a Message Is Displayed
Message	Cause	Solution
Updating desti-	The destination list is being up-	Wait until the message disap-
nation list. Re-	dated from the network using	pears. Do not switch off the pow-
select	SmartDeviceMonitor for Admin	er while this message is
destination(s)	or Web Image Monitor.	displayed. Depending on the
		number of destinations to be up-
or sender's name
		dated, there may be some delay
later.
		before you can resume operation.
		Operations are not possible while
		this message is displayed.
You do not have	Use of this function is restricted.	Contact the administrator.
privileges to
use this func-
tion.
Authentication	Wrong login user name or password.	Confirm correct login user name
failed.		or password.
Authentication	Authentication is not possible	Contact the administrator.
failed.	from this machine.
Connection with	A network error has occurred and	Try the operation once more. If
LDAP server has	connection has failed.	the message is still shown, the
failed. Check		network may be crowded. Check
the server sta-		the information of [System Set-
		tings]. See “Administrator Tools”,
tus.
		General Settings Guide.
LDAP server au-	The entered user name or pass-	Make settings correctly for the
th. has failed.	word does not match that speci-	user name and the password for
Check the set-	fied for LDAP server	LDAP server authentication.
tings.	authentication.
Exceeded max.	The number of search results has	Search again after changing the
number of search	exceeded the maximum number	search conditions.
results which	of items that can be displayed.
can be dis-
played. Max.:
nnn
(A figure is placed at
n.)
LDAP server	A network error has occurred and	Try the operation once more. If
search timed	connection has failed.	the message is still shown, the
out. Check the		network may be crowded. Check
server status.		the information of [System Set-
		tings]. See “Administrator Tools”,
		General Settings Guide.
Specified group	The specified group contains	To select destinations for sending
contains some	some destinations for sending by	by e-mail, press [Select] for the
invalid dest. Do	e-mail and some destinations for	message displayed on the e-mail
you want to se-	sending by Scan to Folder.	screen. To select destination for
lect only valid		sending by Scan to Folder, press
		[Select] for the message displayed
dest.?
		on the Scan to Folder screen.

3

23