When a Message Is Displayed
When a Message Is Displayed
This section describes the principal messages that appear on the display panel. If a message not described here appears, act according to the message.
Reference
Before turning the main power off, see “Turning On the Power”, About This Machine.
Status Messages
This section describes the machine status messages.
Message | Status |
| 4 |
|
| ||
|
|
|
|
Ready | This is the default ready message. The machine is ready |
|
|
| for use. No action is required. |
|
|
|
|
|
|
Printing... | The machine is printing. Wait a while. |
|
|
|
|
|
|
Waiting... | The machine is waiting for the next data to print. Wait a |
|
|
| while. |
|
|
|
|
|
|
Offline | The machine is offline. To start printing, switch the ma- |
|
|
| chine online by pressing the {Online} Key. |
|
|
|
|
|
|
Please wait. | This message may appear for a few seconds. It means the |
|
|
| machine is initializing or executing maintenance opera- |
|
|
| tions. Wait a while. |
|
|
|
|
|
|
Resetting Job... | The machine is resetting the print job. Wait until |
|
|
| “Ready” appears on the display panel. |
|
|
|
|
|
|
Setting change... | The machine settings are being changed. Wait a while. |
|
|
|
|
|
|
Hex Dump Mode | In Hex Dump mode, the machine prints received data in |
|
|
| hexadecimal format. Turn off the machine after printing, |
|
|
| and then turn back on. Hex Dump mode is used for ad- |
|
|
| vanced troubleshooting. |
|
|
|
|
|
|
|
|
|
|
Alert Messages
This section describes the machine alert messages.
Message | Cause | Solution |
|
|
|
Problem:Wire- | An error may have occurred in | Turn off the main power switch, |
less card | the IEEE 802.11b card. | and back on again. If the message |
|
| appears again, contact your sales |
|
| or service representative. |
|
|
|
Problem:Wire- | An error may have occurred in | Turn off the main power switch, |
less board | the IEEE 802.11b board. | and back on again. If the message |
|
| appears again, contact your sales |
|
| or service representative. |
|
|
|
39