Adding Paper and Replacing Toner

Orientation-Fixed Paper or Two-Sided Paper

The following describes paper with its orientation and printing surface specified (letterhead paper).

Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, prepunched paper, or copied paper) might not print correctly, depending on how the originals and paper are placed. Select [On] in Letterhead Setting under Copier Features, and then place the original and paper as shown below. See “Copier Features”, General Settings Guide.

When printing with the printer function, placing orientation is the same.

❖Original Orientation

Exposure glass

 

ADF or ARDF

*1

*2

*1

6 *1

*2

When copying in this orientation using the duplex function, select [Always Specify] in [Orientation] under [Copier Features] (User Tools). Place originals, and then select

as the original orientation.

When copying in this orientation using the duplex function, and loaded paper orientation is L, place originals as shown below:

68