Ricoh manual 15

When a Job Is Not Performed

When a Job Is Not Performed

If you cannot execute a function, it may be that the machine is being held up by	1
another function.

If you cannot execute a function, terminate any other functions currently active, and then try executing the function again. In some cases, you can carry out another job (copi- er, facsimile, printer, or scanner) without canceling the current job being performed. Performing multiple functions simultaneously like this is called “Multi-accessing”.

❖Combination Chart

Mode after you select Copy

select			the control panel
			Using
Mode before you
Copy	Using the control panel		⋅
	Copying		⋅
	Transmission Operation
	Transmission	Scanning an Original for	⋅
		Memory Transmission
		Memory Transmission
Facsimile	Reception	Immediate Transmission	⋅
		Memory Reception
		Printing Received
		Data
Printer	Receive Data
	Print	Printing
Scanner		Using the control
		panel
TWAIN		Scanning
		Scanning	⋅

	Facsimile						Printer		Scanner
		Transmission			Reception			Print
Copying	Transmission Operation	Scanning an Original for Memory Transmission	Memory Transmission	Immediate Transmission	Memory Reception	Printing Received Data	Receive Data	Printing	Using the control panel	Scanning
⋅
⋅		*1			*1					*1
	⋅	⋅			⋅
⋅	⋅	⋅			⋅				⋅	⋅
				⋅	⋅	⋅
⋅	⋅	⋅		⋅	⋅	⋅			⋅	⋅
				⋅	⋅	⋅
				*2	*2	*2 ⋅

							⋅	⋅
*1		*1			*1		⋅	⋅
⋅	⋅	⋅	⋅	⋅	⋅	⋅	⋅	⋅

TWAIN

Scanning

⋅

⋅

⋅

⋅

⋅

⋅

⋅

⋅

⋅

⋅

⋅

…means that these functions can be used together.

…means that you can interrupt the current job with the function keys to proceed to a subsequent job.

…means that another job will automatically start after the current job is finished.

⋅…means that you must manually start another job after the current job is finished (i.e., these functions cannot be used together).

*1

*2

You can scan a document once the preceding job documents are all scanned. During parallel reception, any subsequent job is suspended until reception is completed.

9