Other Transmission Features

Manual Dial

The optional handset or an external telephone is required to use this function.

3

88

Pick up the handset or the external telephone and dial. When the line is connected and you hear a high- pitched tone, press the {Start} key to send your fax message. If, on the other hand, you hear a voice at the other end, continue your conversation as you would normally over the tele- phone.

Note

Manual Dial does not work with ISDN lines.

Results of transmissions with this feature are not mentioned in the Transmission Result Report.

You can specify destination with the number keys, Quick Dial key or Speed Dial.

While using the optional handset or an external telephone, you can store the fax documents for the Memory Transmission if "Storing fax documents for the Memory Transmission while using the Manual Dial function" is set to "En- able" with User Parameters. How- ever, while this feature is set to "Disable", you cannot transmit fax- es using the Manual Dial function. See p.178 “User Parameters” (switch 09 bit 4).

If you lift the handset immediately after the machine switches to Night Timer mode, there will be no sound for a maximum of 4 sec- onds. When you can hear sound again, you can continue.

A Set the original and select any scan settings you require.

B Pick up the external telephone.

You will hear a dial tone.

C Dial.

The fax number you enter is dialed immediately.

Note

If you incorrectly enter the number, replace the external telephone and try again from step B.

Reference

p.46 “Dialing”, <Basic Features>

p.75 “Handy Dialing Functions ”

D When the line is connected and you hear a high-pitched tone, press the {Start} key to send your fax message, and replace the handset of the external telephone.

Transmission starts.

After transmission the machine will return to the standby mode.

Note

If someone picks up the phone at the other end, ask them to do what is necessary to receive the fax.

If you wish to cancel transmis-

sion while it is in progress, press the {Stop} key then remove the original.