Savin Press, Press, Number, Number 2), CPress [OK], CPress [OK], B Enter the fax number, B Enter the fax number, Registering your Own Fax

System Settings

❒After registering Own Fax Num- ber 1 or 2, you can make settings so that the machine does not respond to incoming faxes that do not send their Own Fax Numbers with User Parameters. See p.178 “User Pa- rameters” (switch 13 bit 5).

Reference

p.89 “Selecting the Line”

A Press the {User Tools} key.

B Enter the code for "Key Op. Tools" with the number keys. Then press the {q} key.

The "Key Op. Tools" main menu appears.

C Enter the code for "System Set- tings" with the number keys.

D Enter the code for "G4 Digital Line" with the number keys.

Note

❒If "G4 Digital Line" is not dis- played, press [↑Prev.] or [↓Next] until it is.

E Depending on the setting you wish to register, use one of the following procedures:

Registering your Own Fax

Number 1

A Enter the code for "Own Fax

Number 1" with the number keys.

B Enter the fax number.

Note

❒If your fax number is 123–

456–7890, enter "1234567890." 7

CPress [OK].

Registering Your SPID (Own Fax

Number 2)

A Enter the code for "SPID" with the number keys.

B Enter the fax number.

Note

❒If your fax number is 123– 456–7890, enter "1234567890."

CPress [OK].

195