Savin Note, Stop, Note, Stop, Note, Note, Clear, Clear, [Cancel], Reference, N Press [OK], I Press [Sender], L Press [Sender]

Key Operator Settings

H Enter the fax number of the Forwarding Address with the number keys.

K Enter the 2-digit code of the Specified Sender you wish to register with the number keys.

	Note
	❒ If you enter the number incor-
	rectly, press the {Clear} key or
	{Stop} key and try again. The
	{Clear} key deletes one charac-
	ter at a time, and the {Stop}
	clears the whole line.
	❒ If the optional ISDN Unit or op-
	tional Extra G3 Interface Unit is
	installed, select the line you
	wish to use before entering the
	fax number. See p.89 “Selecting
	the Line”.
	❒ When the NIC FAX Unit (Op-
	tion for Type1) is installed, you
7
	can also enter an e-mail address.

I Press [Sender] .

Note

❒If you enter the first digit of the

code incorrectly, press the {Clear} key or the {Stop} key to clear it and enter the correct code. If you enter the code in- correctly with the two digits, press [Cancel] in step L.

L Press [Sender].

Note

❒If you do not register any Speci- fied Senders, all incoming faxes are forwarded.

J Enter the code for "Program Send- er" with the number keys.

M Enter the sender name or sender number of the other party's fax machine you wish to register as a Specified Sender.

Note

❒You can use letters, symbols, numbers, or spaces when enter- ing the sender name or sender number.

Reference

p.98 “Entering Characters”,

<Basic Features>

N Press [OK].

226