Transfer Request

Specifying an End Receiver

When you make a Transfer Request, you must specify the final destinations (End Receivers) for your mes- sage.

You cannot enter the numbers of the End Receivers directly. Instead, enter a simple code that describes where the numbers are stored in the Transfer Station (in Quick Dial keys, Speed Dials or Groups).

The numbers must first have been stored in Quick Dial keys, Speed Dials or Groups in the Transfer Sta- tion(s).

❖Quick Dial

Enter {q} followed by the num- ber (3 digits) of the Quick Dial where the End Receiver is stored.

For example, to choose the number stored in Quick Dial 001 in the

Transfer Station, enter:

{q} {0} {0} {1}.

Note

❒If the End Receivers only sup- port 2 digits for the Quick Dials,

enter the number with 2 digits like {q} {0} {1} .

❖Speed Dial

Enter {q}, {p} followed by the Speed Dial code (2 or 3 digits). For example, to choose the number

stored in Speed Dial 012 in the

Transfer Station, enter: {q} {p} {0} {1} {2}

Note

❒If the End Receivers only sup- port 2 digits for the Speed Dials,

enter the number with 2 digits like {q} {p} {1} {2}.

❒ You need to install Optional Function Upgrade Unit to enter 3 digits code for the Speed Dial.

❖ Group Dial

1

Enter {q}, {p}, {p} followed

by the Group number (2 digits). For example, to choose the number stored in Group 04 in the Transfer

Station, enter: {q} {p} {p} {0} {4}.

31