Savin Transfer Boxes, by mode, F Press [OK], G Press [Yes], H Press [Yes], mation box you wish to delete, I Press [PrevMenu] three times

Key Operator Settings

E Enter the SEP Code of the Infor-	J Press [Exit] to return to the stand-
mation box you wish to delete.	by mode.

Note

❒If you enter the code incorrectly, press the {Clear} key or the {Stop} key, then try again.

F Press [OK].

Note

❒If a password is already regis- tered, enter the password, then press [OK].

G Press [Yes].

7

H Press [Yes].

Note

❒If you press [No], the box is not deleted and the display in step E reappears.

I Press [PrevMenu] three times.

Transfer Boxes

This feature turns your machine into a fax relay station. Documents sent with a SUB Code that matches the SUB Code registered as a Transfer Box are received then relayed to the registered receiver.

Since documents can be sent to multiple destinations in a single transfer re- quest, y ou can econom ize on communication costs when sending to remote destinations.

	This Machine iTransfer Station j	End Receiver
		A
Requesting party	Transfer Box
SUB:7777	SUB Code : 7777
	End Receiver : A,B,C
Transfer		End Receiver
		B
Request	SUB Code : 8888
	End Receiver : D,E,F
	SUB Code : 9999	End Receiver
	End Receiver : G,H,I
		C
Print
		GFCYUB0N

Note

❒Inform the requesting party of the SUB code assigned to the Transfer Box. When they wish to have a message transferred by your ma- chine, ask them to send the mes- sage using SUB Code Transmission and specifying this SUB code. If a password is also registered, inform them of this too and ask them to en- ter it for the SID code. See p.78 “SUB/SID (SUB Code Transmis- sion)” and p.13 “SUB Code Trans- mission with the Mode Key”.

254