Savin [OK].Sub-address, I Press [OK], A Select G4 or ISDN-G3, J Press the {Start} key, B Enter the PWD code then press

Other Transmission Features

B Enter the PWD code then press[OK].Sub-address

3 Note

❒You can enter up to 20 char- acters.

❒You can enter digits 0-9, q, p and spaces. To enter a space, press [Space] (the first character cannot be a space).

❒If you incorrectly enter the

code, press the {Clear} key or {Stop} key and try again.

❒Make sure that the ID you enter conforms with the specifications of the other party's fax machine.

I Press [OK].

Note

❒To cancel the operation, press [Cancel] and the display will re- turn to standby mode menu.

J Press the {Start} key.

The connection is established and the reception starts.

The optional ISDN Unit is required to use this function

ISDN allows two or more terminals (such as a fax and digital telephone) to be connected to a single line. These terminals are identified by their sub- address numbers. If the terminals connected to the line at a destination are assigned sub-addresses, dialing a sub-address allows you to direct your fax message to one or more particular terminals at the destination.

Preparation

You need to assign the Sub-address feature to a User Function key beforehand. See p.154 “User Function Keys”

Limitation

❒Sub-address can only be used with ISDN.

Note

❒You can program a sub-address number in a Quick Dial key or Speed Dial.

A Select G4 or ISDN-G3.

Reference

p.89 “Selecting the Line”

B Set the original and select any scan settings you require.

82