Chapter 10 - Create/Edit

TEC Init

2.Select a panel from the left pane of the TEC Initial Values Editor window to display available panels.

3.Select the desired panel by clicking the panel name in the left pane of the TEC Initial Values Editor window.

4.Select the desired device from the FLN Device Name drop-down in the TEC Initial Values Editor window.

5.Set the initial value by using the cells under the Initial Value column in the Points table.

6.Click Save.

The Save button becomes grayed out once the modification are complete.

Updating the Panel

1.Click the TEC Init icon from the Create/Edit bar.

The TEC Initial Values Editor window displays.

2.Select a panel from the left pane of the TEC Initial Values Editor window to display available panels.

3.Select the desired panel by clicking the panel name in the left pane of the TEC Initial Values Editor window.

4.Select the desired device from the FLN Device Name drop-down in the TEC Initial Values Editor window.

5.Update the panel by clicking the Update Panel button.

6.Click Save.

The Save button will be grayed out once the modification are complete.

Initializing

1.Click the TEC Init icon from the Create/Edit bar.

The TEC Initial Values Editor window displays.

2.Select a panel from the left pane of the TEC Initial Values Editor window to display available panels.

3.Select the desired panel by clicking the panel name in the left pane of the TEC Initial Values Editor window.

120

 

Siemens Industry, Inc.

125-3584T

Page 120
Image 120
Siemens 125-3584T manual Updating the Panel, Initializing