Chapter 10 - Create/Edit

PPCL

4.Select the desired device from the FLN Device Name drop-down in the TEC Initial Values Editor window.

5.Initialize the TEC by clicking the Initialize TEC button.

6.Click Save.

The Save button will be grayed out once the modification are complete.

Releasing Points

1.Click the TEC Init icon from the Create/Edit bar.

The TEC Initial Values Editor window displays.

2.Select a panel from the left pane of the TEC Initial Values Editor window to display available panels.

3.Select the desired panel by clicking the panel name in the left pane of the TEC Initial Values Editor window.

4.Select the desired device from the FLN Device Name drop-down in the TEC Initial Values Editor window.

5.Release points by checking the check box in the Release column in the Points table. Multiple points can be released at the same time.

6.Click Save.

The Save button will be grayed out once the modification are complete.

PPCL

Section Overview

This section discusses the following topics:

PPCL Editor Overview

User Interface Description for the PPCL Editor

Tips for Using the PPCL Editor

PPCL Editor Step-by-Step Instructions

Creating a PPCL Program

Modifying a PPCL Program

Viewing a PPCL Program

Deleting a PPCL Program

PPCL Editor Overview

 

121

Siemens Industry, Inc.

125-3584T

Page 121
Image 121
Siemens 125-3584T manual Releasing Points, Ppcl Editor Overview