Siemens 125-3584T manual Using the Point Log Report Application, Running a Point Log Report

Chapter 7 - Point Log Report

Using the Point Log Report Application

The Name field allows you to search on the point name, using wildcard characters if necessary.

The Type drop-down allows you to choose the type of point on which to run the Point Log Report.

The Search MSTP check box determines whether or not the report will include MS/TP points.

The Go button runs the report.

The Cancel button cancels the report.

The Status Filters check boxes allow you to filter the report based on the status options (In-Alarm, Fault, Out of Service, Overridden, and Unacknowledged Alarm).

The Print button allows you to print the report.

The Export to CSV button allows you to export the report data to a Comma Separated Variable file which can be saved.

Using the Point Log Report Application

Running a Point Log Report

1.Generate a Point Log report by clicking the Reporting bar in the left navigation pane, and clicking the Point Log Report icon.

A report pane will display and allow filter selection.

2.Select the desired panel by clicking the panel name in the Panels drop-down field.

The chosen panel will be indicated by a checkmark.

NOTE: A Point Log report can be run on multiple panels at the same time. In the Panels drop-down field, select all of the desired panels, or choose All. The selected panels are indicated by checkmarks. (Tip: To select all but one or a few panels, click All and then deselect the unwanted panels.)

	47
Siemens Industry, Inc.	125-3584T