Chapter 10 - Create/Edit

Event Enrollment

Event Enrollment

For information about intrinsic alarming, see the Point Editor section of this document.

To receive alarms from BTECs and PPMs, Event Enrollment must be used.

Section Overview

This section discusses the following topics:

Event Enrollment Editor Overview

User Interface Description for the Event Enrollment Editor

Tips for Using the Event Enrollment Editor

Event Enrollment Editor Step-by-Step Instructions

Creating an Event Enrollment Object

Modifying an Event Enrollment Object

Viewing an Event Enrollment Object

Deleting an Event Enrollment Object

Alarm Reports

Event Enrollment Overview

Event Enrollment objects are stand-alone alarm objects which change their status based on the condition of another object. The purpose of an event enrollment object is to identify an event (for example, exceeding of an alarm level) and to provide a connection between the event occurrence and the transmission of notification messages to one or more recipients.

User Interface Description for the Event Enrollment Editor

The Event Enrollment Editor can be accessed via the Create/Edit bar in the navigation pane on the left side of the screen.

1.Click the Event Enrollment icon.

The Event Editor window will display.

2.In the Event Editor, choose the desired panel, and click the existing Event Enrollment Object name to open the viewing area in the right pane of the Event Editor (a COS type Event Enrollment Object is shown):

 

93

Siemens Industry, Inc.

125-3584T

Page 93
Image 93
Siemens 125-3584T manual Event Enrollment Overview, User Interface Description for the Event Enrollment Editor