Chapter 5 - Point Commander
Point Commander Application Overview
37
Siemens Industry, Inc. 125-3584T
– the Out of Service status indicator displays a check mark
The lower right section of the Commanding window displays the following status
indicators, which indicate status with a check mark:
The In-Alarm check box indicates when the point is in an alarm status. See the
Status Bar
section for more information.
The Fault check box indicates when the point is in a fault status.
The Overridden check box indicates when the point has been manually overridden.
The Out Of Service check box indicates when the point has been disabled.
Dynamic Trending Dynamic Trending for the point can be accessed by clicking the Trending button next
to the Advanced button at the bottom of the Commanding window. See the
Trend
section for more information.
Advanced Command Options (Points with Priority Array) For points with priority array, the advanced command options can be accessed by
clicking the Advanced button at the bottom of the basic Commanding window. The left,
top, and bottom sections of the window remain the same. Click the Basic button to
toggle back to the basic Commanding window.
If the point has priority array, the priority values can be changed through a command to
a particular priority field. The priority fields that are not applicable will be grayed out.