Siemens 125-3584T manual Creating a Remote RecipientNotReleased

Chapter 10 - Create/Edit

Remote Notification

The width and order of the table columns can be changed in the application pane, but the changes remain only for the current session. Once you leave the editor, the column configuration reverts to the default settings.

To change the width of the columns, click and hold the vertical edge of the column header and move the line to the desired width.

To change the order of the columns, click and hold the column and move it to the desired location within the table.

If you do not save modifications to the Remote Recipient List Editor, and close the editor, all modifications will be discarded. Be sure to save any changes using the Save button.

Creating a Remote RecipientNotReleased

1.Click the + button at the bottom left of the Remote Recipient List Editor table.

The Remote Recipient List displays a new Remote Recipient entry.

The Index cell is populated with the next consecutive Index number available. This cell is not editable. The Remote Recipient List can contain up to 50 entries.

The Alias cell is populated with the assigned Index number. The Alias cell is editable. The Alias is required and must be unique.

The Alias cell can be used as a placeholder within the Remote Recipient List if necessary. For example, an alias of “Manager” might be created without a remote address. The remote address can be added at a later time.

2.Edit the Alias cell.

110
Siemens Industry, Inc.	125-3584T