Silvercrest SBB850EDSA1-02/10-V3 operating instructions Technical data, Disposal

•To reassemble the appliance lid , guide the hinge cams through the opening of the hinge guides.

Baking moulds and kneading paddles

The surfaces of the baking mould		and kneading
paddles	have a non-stick coating. When clea-

ning the appliance do not use aggressive deter- gents, cleaning powders or objects that may cause scratches to the surfaces.

Due to moisture and vapours the surfaces of various parts may undergo changes in their appe- arance over a period of time. This has no influence on the function nor does it reduce the quality of the baking results.

Before cleaning, take the baking mould		and
kneading paddles	out of the baking area.
Wipe the outside of the baking mould		with a
moist cloth.

￿Important

Never submerse the baking mould		in water or
other liquids.
Clean the interior areas of the baking mould
with warm soapy water.
If the kneading paddles	are encrusted and it is
difficult to dissolve, fill the baking mould			with hot
water for approx. 30 minutes.
If the mountings of the kneading paddles			are

clogged, you can clean them carefully with a wooden toothpick.

Do not use any chemical cleaning agents or solvents to clean the Bread Baking Machine.

Technical data

Model:	Bread Baking Machine
	SBB 850 EDS A1
Nominal voltage:	220-240V~50Hz
Power consumption:	850 Watt

Disposal

Do not dispose of the appliance in your normal domestic waste. This pro- duct is subject to the European guideli- ne 2002/96/EC.

Dispose of the appliance through an approved dis- posal centre or at your community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal centre.

Dispose of all packaging materials in an environmentally friendly manner.

- 11 -