Integer type

Parameter which specifies a particular PDP context

 

 

definition (see +CGDCONT command). If no <cid> is

 

 

specified, the addresses for all defined contexts are

 

 

returned

 

 

 

<PDP_address>

Description

 

 

String type

A string that identifies the MS in the address space

 

 

applicable to the PDP. The address may be static or

 

 

dynamic. For a static address, it will be the one set by

 

 

the +CGDCONT command when the context was

 

 

defined. For a dynamic address it will be the one

 

 

assigned during the last PDP context activation that

 

 

used the context definition referred to by <cid>.

 

 

<PDP_address> is omitted if none is available

6.7 AT+CGQMIN

Quality of Service Profile (Minimum

Acceptable)

 

 

 

 

 

 

 

 

 

Description

 

Command

Possible Responses

 

 

 

 

 

Set minimum

+CGQMIN=[<cid>

•_ +CME ERROR: <err>

 

acceptable

 

[,<precedence>

•_ OK

 

profile

 

[,<delay> [,<reliability>

 

 

 

[,<peak>

•_ ERROR

 

 

 

[,<mean>]]]]]]

 

Read the

+CGQMIN?

command

 

Test if the +CGQMIN=? command is

supported

•_ +CGQMIN: <cid>, <precedence>, <delay>, <reliability>, <peak>, <mean>[<CR><LF>+CGQMIN

:<cid>, <precedence>, <delay>, <reliability>, <peak>, <mean>[…]]

•_ OK

•_ ERROR

•_ +CGQMIN: <PDP_type>, (list of supported <precedence>s), (list of supported <delay>s), (list of supported <reliability>s) , (list of supported <peak>s), (list of supported <mean>s)[<CR><LF>+CGQM IN: <PDP_type>, (list of supported <precedence>s), (list of supported <delay>s), (list of supported <reliability>s) , (list of supported <peak>s), (list of supported <mean>s)[…]]

Owner’s Manual

Rev 1.0

Page 120 of 120