3.23AT+CPIN PIN Control

Description

Command

Possible Responses

 

 

 

 

Request PIN Control

 

AT+CPIN=<pin>[,<new

•_ +CME ERROR:

 

 

pin>]

<err>

 

 

 

 

 

 

•_ OK

 

 

 

•_ ERROR

Show the current

 

AT+CPIN?

•_ +CPIN: <code>

setting

 

 

•_ +CME ERROR:

 

 

 

 

 

 

<err>

 

 

 

•_ OK

 

 

 

•_ ERROR

 

 

 

 

Show if the command is

AT+CPIN=?

•_ +CME ERROR:

supported

 

 

 

 

<err>

 

 

 

•_ +CPIN: (supported <code>s)

•_ OK

•_ ERROR

Sends the password to the ME, which is necessary to make the ME operational (SIM PIN, SIM PUK or PH-SIM). If the PIN is to be entered twice, the TA autonomously repeats the PIN. If no PIN request is pending, no action is taken towards the ME and an error message (+CME ERROR <err>) is returned to the TE.

If the PIN required is PUK, the second pin is required. This second PIN, <newpin>, is used to replace the old PIN in the SIM.

NOTE! - Commands which interact with the ME that are accepted when the ME has a pending request for SIM PIN, SIM PUK or PH-SIM are: +CGMI, +CGMM, +CGMR, +CGSN, +CFUN, +CMEE +CPIN, L and M.

<pin>,<newpin> Description

 

string

The range for the SIM PIN and the PH- SIM PIN is 4 -

 

 

8 digits. The SIM PUK consists of 8 digits

 

 

 

 

Note!_

 

 

 

 

 

 

 

<code>

Description

 

 

 

 

 

 

READY

ME is not pending for any password

 

 

 

 

 

Owner’s Manual

Rev 1.0

Page 87 of 87