Identification
9.1 AT | Attention Command |
|
| |
|
|
|
|
|
|
| Description | Command | Possible Responses |
|
|
|
|
|
|
| Checks the communication | AT | •_ OK |
|
| between the MS and application |
| •_ +CME ERROR <err> |
|
|
|
| |
|
|
|
|
|
This command is used to determine the presence of an MS. If the MS supports AT commands, it returns an OK final result code.
9.2AT&F Set to Factory Defined Configuration
Description | Command | Possible Responses |
Execute | AT&F |
Show if supported and | AT&F=? |
list available parameter |
|
range |
|
•_ OK
•_ ERROR
&F: (list of supported <profile>s)
This command instructs the DCE to set all parameters to default values specified by the manufacturer, which may take in consideration hardware configuration and other manufacturer defined criteria.
9.3AT&W Store User Profile
Description | Command | Possible Responses |
Stores the current user AT&W=[<pr>] or profile to non volatile AT&W[<pr>] memory
Show if the command is AT&W=? supported
•_ OK
•_ ERROR
&W: (list of supported <pr>s)
This command stores the current user profile in
Owner’s Manual | Rev 1.0 | Page 136 of 136 |